Dicodes Dani SBS Box Mod

Dicodes Dani SBS Box Mods

The Dicodes Dani SBS Box Mod is a regulated battery mod which can be used with atomizers up to 25mm in diameter. SBS stands for "Side-by-Side" and thus describes the design in which the atomizer is screwed on next to the battery compartment. This creates a compact appearance on with large atomizers. The spring-loaded 510 contact is made from the copper beryllium, which should protect against abrasion and wear. The SBS is powered by an 18650 Accu and delivers up to 80W of output power. The SBS has two buttons, on the top of the head and on the front below the atomizer, which can either function individually or both as a fire button. The oval button on the head is shaped inside so that the button always fires, whether you press in the middle or on the edge. When navigating the menu, the button on the head acts as the "plus button" and the one under the atomizer acts as the "minus button". The 0.5inch OLED display is built into the top. The Housing is made from the high quality anodized aluminum and comes in different colors. The top and bottom parts are made from the Stainless steel and have a brushed stainless steel look.

Inner values

Electrically, the SBS allow vaping with powers up to 80W, as well as- in addition to 4 different operating modes - especially temperature-controlled vaping with almost any type of wire, such as(NiFe30 RESISTHERM), Nickel, Titanium, Stainless steel and others. Those who already use Dicodes products will easily find their way around. For Dicodes beginners, it can be quite tricky, but here the very well written manual provides relief. Beauty rings are offered so that slimmer atomizers do not look "lost" on the Mod. Likewise, a Charging station for the Dicodes Dani SBS Box Mod is available, which make charging easy and convenient. For this purpose, the Mod has charging contacts on the underside. The Dicodes Boxes (incl. chip) are all completely made in Germany.