Cool design, integrated Battery up to 75 watts. All the Mods a person needs and equipped with a rebuildable atomizers tank - that is the iStick Pico from Eleaf, which is also well suited for newcomers among the rebuildable atomizers.
There are sometimes new Accu, which immediately inspire. One of them is the iStick Pico, which is not a beginner's model just because of its firmware and the equipment with a rebuildable atomizers Tank, but a model for people who have always wanted to try self-winders.
The firmware on the Pico ensures that self-winding is somewhat less dangerous. Via the OLED display you can not only make settings, you can also comfortably take your first steps into the world of rebuildable atomizers safely. Especially with rebuildable atomizers, you can misjudge the currents that flow through the windings, so an Accu with good firmware makes sense. In terms of firmware, the Pico shines with VW/Bypass/Smart/TC Mpde for the following wires - Ni,Ti,SS,TCR-M1,M2,M3.
The Accu has integrated 2 300 mAh and outputs a maximum of 75 watts. At the same time, the Accu is equipped with a cool design. The firmware also has a preheat mode and can be updated at any time. The fire button is located at the top, next to the Tank.
The rebuildable atomizers features an eight-hole airflow. A four-hole winding desk and the airflow is given directly to the winding. The tank has a filling volume of 4.2 ml and at the base, the tank has an extra filler hole, through which you can easily refill Liquid. In addition, the Tank is equipped with a light that indicates the filling level.
Technical details
Height: 10 cm
Width: 5 cm
Diameter: 2,4 cm
Accu: 2 300 mAh (built-in)
Watt: 1 - 75 Watt
TC: 100 - 315 degrees
Resistance: 0.05 - 1.5 Ohm (TC modes)
Mods: VW/Bypass/Smart/TC (Ni,Ti,SS,TCR-M1,M2,M3)
Filling volume Tank: 4.2 ml
Included in delivery:
1 iStick Pico RDTA
2 Clapton coils
1 cotton
1 USB cable
1 instruction manual
Spare parts
