Geekvape Max100 Box Mod
The Geekvape Max100 Mod is offered in five different colors, the output power ranges from 5 to 100 watts, there are VW, TC, TCR, VPC and Bypass modes to choose from and it is powered by a single 18650 / 20700 or 21700 battery (not included in delivery).
Geekvape Max100 Battery Carriers / Mods
The Geekvape Max100 battery mod is powered by a single 20700 / 21700 battery, optionally a 18650 battery can be used with included adapter (not included in delivery). The Battery, is brought into the Mod by opening the battery compartment, which is located at the bottom of the Mod.
Further, the Geekvape Max 100 offers a VW, TC, TCR, VPC and a Bypass mode. The settings are made via two buttons, which are located below the display and the output power ranges from 5 to 100 watts. Above the 1.08 inch TFT display, the generous fire button can be found. The highlight, however, is the existing slider, so you can completely lock the Mod if necessary.
In addition, there is an IP68 classification, so the Mod is not only shockproof and dustproof, but also waterproof, so the device is optimally protected, should it ever get wet. The Geekvape Max 100 Mod is equipped with short-circuit, reverse polarity, overheating and low-voltage protection as well as draw duration limitation.
Technical details | |
|---|---|
| Variable wattage: | Yes |
| Max. Power - W: | 100.00 |
| Battery size: | 1x 18650, 1x 20700, 1x 21700 |
| Atomizer profile: | ≤ 31 mm |
| Length: | 92.6 mm |
| Width: | 31.5 mm |
| Depth: | 42 mm |
Scope of delivery |
|---|
1 Geekvape Max100 Akkuträger/Mod |
| 1 USB Typ-C Kabel |
| 1 18650 Batterie Adapter |
