The world of vaping has many facets, from pre-filled pods to ready-made coil atomizers, and even to DIY coil-building atomizers, a wide range is offered. Here you will learn how to build a DIY coil atomizer yourself.

The Hellvape Dead Rabbit 3 RTA atomizer is a stylish vaporizer that is available in 8 different colors. It has a dual postless winding deck and the Tank, with its pre-installed Glass, holds 3.5 ml. Unlike similar models, this atomizer comes with a Bubbler glass with a capacity of 5.5 ml.
Hellvape Dead Rabbit 3 RTA - Now it gets stylish
The Hellvape Dead Rabbit 3 RTA atomizer has a lot to offer. It features a modern postless deck and a simple dual coil design. The airflow is from top to bottom (top-to-bottom airflow), which has the advantage of preventing E-Liquid from escaping. The full atomization effect with dense vapor and intense flavor is given.
The refilling of E-Liquid is particularly easy with the Hellvape Dead Rabbit 3 RTA atomizer designed. The upper cap is easily opened by a quarter turn and the E-Liquid can be filled. With the included Bubble Glass, the Tank capacity can be expanded from 3.5 ml to 5.5 ml moreover.
The RTA has a diameter of 25 mm and a height of 50.5 mm. The included coil type is two 0.37 Ohm Ni80 Clapton Coils. With a net weight of only 59 g, this atomizer is decidedly lightweight. It is composed of six individual parts. Starting at the top with the 810 Drip Tip, then comes the Top Cap, continuing with the AFC Ring and Chamber, followed by the Glass Tube and Deck. At the end there is also a common 510 pin.
Technical details |   |
|---|---|
| Tank capacity: | 5.50 |
| Length: | 50.5 mm |
| Diameter: | 25.0 mm |
| Drip Tip: | 810.00 |
| Coil Type: | Dual Coil |
| Draw type: | In between, DL |
Scope of delivery |
|---|
1x Hellvape Dead Rabbit 3 RTA |
| 2x 0.37 Ohm Ni80 Clapton Coil |
| 2x Watte |
| 1x Coil Cutting Tool |
| 1x Bubble Glas (5.5 ml) |
| 1x Zubehörtasche |
| 1x Bedienungsanleitung |














