Loading...

Lost Vape Centaurus B80 AIO Kit

With the Lost Vape Centaurus B80 AIO Kit you get everything your DL heart desires. The Centaurus B80 Mod requires a separately available 18650 Battery for operation and the maximum and variable power output is a powerful 80 watts. The highlight is the two included tanks. DU gets with the kit the Lost Vape Centaurus Boro Tank, which has a single coil deck and the Lost Vape UB AIO Pod, which is operated with the Lost Vape UB Ultra Coils. Both tanks allow you to fill it with up to 5ml of Liquid.

In stock
CHF 52.90
Necessary accessories

Lost Vape Centaurus B80 AIO Kit


Lost Vape presents the Centaurus B80 AIO, a multifunctional set that can be powered by either the Lost Vape Centaurus Boro Tank or the Lost Vape UB AIO Pod.


Lost Vape Centaurus B80 AIO Battery Mod - Up to 80 watts of output power.

For the Housing of the Centaurus AIO Mod, Lost Vape relied on Zinc alloy as well as Stainless steel and with a size of 80.8 mm x 50 mm x 24.4 mm, it fits comfortably in the hand. The necessary power is provided by an external 18650 Battery, which is not included but can be purchased separately. Charging is done via USB Type-C cable Included in delivery and 2A charging current or you can use an external charger. For the vapor modes, you have the choice between the Normal mode, which independently adjusts the power output to the Coil resistance, the RBA mode (VW), which allows you to adjust the power variably between 5 and 80 watts and the TC mode, for all those who like to vape temperature-controlled.

The operation is effortless thanks to the two arrow keys and the generous fire button and on the 0.42 inch OLED display you can read the set output power, the charge level of the Accu and the Coil resistance. In addition, the popular puff counter is also on board. You don't have to worry about your safety while vaping either, the Lost Vape Quest 2.0 chip is equipped with the necessary protection circuits.


Lost Vape Centaurus Boro Tank and Lost Vape AIO Pod

The Lost Vape Centaurus Boro Tank wows with a winding deck designed for single-coil installation and three different airflow pins, which allow you to fully customize the airflow to your favorite draw pattern. The inner diameters of the airflow pins are 1 mm, 2 mm and 3 mm (pre-installed).

The Lost Vape AIO Pod, on the other hand, comes with two different Lost Vape UB Ultra (AIO) Coils. Included is a Lost Vape UB Ultra (AIO) 0.15 Ohm Coil, which you fire between 60 and 80 watts and a Lost Vape UB Ultra (AIO) 0.2 Ohm Coil, which covers a power range of 40 to 60 watts. Furthermore, the separately available UB Ultra (AIO) 0.3 Ohm Coil is also compatible (see accessories). You can adjust the air supply of the AIO Pod directly at the base.

In both variants, the filling volume is 5 ml and your Liquid enters the Tank via a side-fill system. Furthermore, you also receive two Drip Tips with the Kit, whereby one of them is already pre-installed.


Technical details

 

Recommended nicotine amount:0 - 03 mg
Suitable for nicotine salts:No
Battery size:1x 18650
Max. Power - W:80.00
Variable wattage:Yes
Rechargeable via USB:Yes
Tank capacity:5.00
Draw type:DL
Box Mod Depth:24.4 mm
Box mod width:50 mm
Mod length:80.8 mm

Scope of delivery

1x Lost Vape Centaurus B80 AIO Gerät 

1x Lost Vape Centaurus Boro Tank
1x Lost Vape UB AIO Pod
1x Lost Vape UB Ultra (AIO) 0.2 Ohm Coil
1x Lost Vape UB Ultra (AIO) 0.15 Ohm Coil
7x O-Ringe 
1x Tankteilepaket 
1x Metallschlüssel
2x Drip Tip
1x USB-Typ-C-Kabel
1x Bedienungsanleitung

Write Your Own Review
You're reviewing: Lost Vape Centaurus B80 AIO Kit