Rincoe Manto AIO Plus Kit

Rincoe Manto Aio Plus Kit

For the Manto AIO Plus casing, Rincoe has chosen ABS, PC, and PCTG materials, creating a true delight for the hands with a size of 82 mm x 47 mm x 28 mm. The side panels are also magnetic and can be effortlessly removed and reattached. 

A single 18650 battery cell, which is not included in the package and must be ordered separately, provides sufficient power. For charging, you have a USB Type-C port available, and the necessary charging cable is included in the package. Alternatively, you can also recharge the battery cell with an external charger. 

With five short clicks on the fire button, you start the device, and to adjust the power variably between 1 and 80 watts, you use the +/- buttons. With three short clicks of the fire button, you activate or deactivate the built-in LED, which lights up when firing. You can read information about the battery status and the set power on the clear display, and a small highlight is the viewing window through which you can see the built-in Manto 2.0 chip. The chip is also equipped with all relevant safety features, so you are always on the safe side when vaping.

The Rincoe Manto AIO Pod can be easily filled via a side-fill system with up to 3 ml, and the bottom airflow control is located directly at the base of the pod. The Rincoe Manto Coils are used. The 0.3-ohm Mesh Coil is pre-installed and operates in a power range of 38 to 45 watts. You will also find in the package the Manto Coil with a resistance of 0.15 ohms, designed for a power range between 50 and 60 watts.