Smok TFV18 Tank

Smok TFV18 atomizer

From the house of Smok comes the TFV18, another member from the well-known TFV family. This is known for its very good taste and a lot of vapor. So it is with the TFV 18, he has been designed for a direct draw and a lot of steam. With its diameter of 31.6 mm at the widest point and 25.4 mm at the 510 connection, it fits on many Mods. Manufactured the TFV18 Tank from the Stainless steel and a bubble Glass made of Pyrex. So he got a capacity of proud 7.5 ml, which also leads to high performance and not immediately to the direct refill. If the Tank is used with the TFV18 0.15 Ohm Dual Mesh Coil, the filling volume is still 6.5 ml. Filling is conveniently done from the top by simultaneously pressing the button and sliding on the Top Cap. Below is an adjustable airflow which shows the strengths of the TFV18 Tank, it is namely provided with large air slots and thus offers a very open and direct draw behavior, which can be reduced by turning the airflow. According to Smok, an open MTL draw behavior should also be possible with the appropriate Coils, but the strengths of the TFV18 are clearly in the DL range. The also shows the large Wide Bore Drip Tip, which is enthroned on the TFV18 Tank. Smok has given the TFV18 Tank a 0.33 Ohm Mesh Coil, as well as a 0.15 Ohm Dual Mesh Coil, both Coils are designed for a power of 80 to 140 watts and allow a very direct draw. With the separately available TFV18 RBA, the Tank can also be converted to a rebuildable atomizers. Smok also offers the possibility to use all Coils from the TFV16 series also in the TFV18.