Eleaf iStick Power 2 Kit

Eleaf iStick Power 2 Kit

The iStick Power 2 Kit consists of the iStick Power 2 Mod and the GTL Pod Tank. At Eleaf, the iStick Power Kit was very focused on performance and design, so a very handy Vape kit has been created, which is powered by a permanently installed 5000 mAh Accu. A peak power of 80 watts can be achieved. The USB Type-C port is used for charging, so the iStick Power 2 Kit is quickly ready for use again. A 0.96" TFT display shows all important information very clearly. Personal settings can be made via the fire button and the two control buttons. Thus, not only the power can be adjusted, it is also possible to change the color of the display and select the operating mode. Eleaf has given the iStick Power 2 a modern chip, so the Mod can be used in Power mode as well as in Volt mode. In addition, the iStick Power 2 Kit can also be operated in Smart mode, this mode detects the coil resistance and gives the optimal power range right away. Further, much value was also placed in terms of safety, so the iStick Power 2 Kit is provided with protective functions such as overcharge protection, deep discharge protection, overcurrent protection, 10-second shutdown, short circuit protection and reverse polarity protection. On the Mod, the GTL Pod tank comes into play. This consists of a Base made of Stainless steel and the Tank made of food grade PCTG. The base is provided with a 510 connection with a diameter of 25 mm. At its widest point, the GTL Pod Tank has a diameter of 26.1 mm. With a capacity of 4.5 ml, it offers enough space for Liquid. To fill, the Tank is removed from the Base and the Liquid is added to the Tank from below. The GTL Coils can also be inserted from below. Eleaf has included the GTL Tank a 0.4 Ohm Coil for a power of 20 to 30 watts and a direct draw, and a 0.8 Ohm Coil for 12 to 18 watts for a restrictive DL draw. The draw resistance can be adjusted with the adjustable airflow in the base completely to personal needs.